Mechanical dimensions: Typically 21.5mm (L) x 11.5mm (W) x 6.8mm (H), with 2.54mm pin spacing suitable for breadboards or perfboards. Exceeding these values may cause permanent damage:

A: Only if you add a constant-current/constant-voltage (CC-CV) control loop. The GYD-9E is a voltage source, not a charger. Conclusion The GYD-9E is a versatile, efficient, and compact step-down converter suitable for a wide range of DIY and industrial applications. While its official datasheet can be difficult to locate due to the generic branding, the electrical characteristics and pinout described above follow the de facto standard for this module.

| Parameter | Conditions | Min | Typ | Max | Unit | |-----------|------------|-----|-----|-----|------| | Output voltage accuracy | Iout=0.5A | ±1 | ±2 | % | | Line regulation | Vin=6V to 24V, Iout=1A | 0.1 | 0.3 | % | | Load regulation | Iout=0.1A to 3A | 0.2 | 0.5 | % | | Output ripple (20MHz BW) | C_out=100µF electrolytic | 30 | 50 | mVpp | | Switching frequency | 450 | 500 | 550 | kHz | | Quiescent current | No load, Vout=5V | 4 | 6 | mA | | Shutdown current | ADJ pin grounded | 80 | 120 | µA |

A: No internal protection. Add an external Schottky diode in series with input if needed.

Introduction In the rapidly evolving world of power electronics, the choice of a switching regulator can make or break a design’s efficiency, thermal performance, and reliability. Among the myriad of DC-DC converter modules available, the GYD-9E has emerged as a notable player in medium-power applications. If you are searching for the official GYD-9E datasheet , you likely need more than just pinouts and maximum ratings—you need application context, efficiency curves, and design notes.

| Pin No. | Symbol | Description | |---------|--------|-------------| | 1 | VIN | Input voltage (4.5V – 28V) | | 2 | GND | Common ground | | 3 | VOUT | Regulated output voltage | | 4 | ADJ | Output voltage adjustment (connect resistor divider to GND) |