A: In most cases, no. Drevitalize 410 Final includes an integrated adhesion promoter. However, for submerged applications or high-corrosion environments, a separate primer may be recommended by the manufacturer.
Wear nitrile gloves, safety glasses, and a dust mask. The final formulation has low odor but can cause skin sensitization. drevitalize 410 final
Apply the mixed compound using a steel spatula or a syringe for precision work. Overfill the damaged area by 0.010–0.020 inches to allow for finishing. For deep cavities (over 0.250 inches), apply in multiple layers, allowing each to tack-cure before adding the next. A: In most cases, no
For critical assets where downtime costs exceed $10,000 per hour, Drevitalize 410 Final offers a same-day or next-day solution without dismantling large assemblies. A Midwest steel processing plant experienced a catastrophic failure when the 12-inch diameter piston rod on a 1,000-ton hydraulic press was deeply scored by a failed wiper seal. The rod’s hard chrome surface was gouged to a depth of 0.040 inches over a 6-inch length. Wear nitrile gloves, safety glasses, and a dust mask
Remove the 2,000-pound cylinder, ship it to a chroming specialist, strip and re-plate the rod (10-day turnaround), then reinstall. Total cost: $28,000 plus $45,000 in lost production.
Drevitalize 410 Final is typically supplied in a dual-cartridge system or as a two-part paste. Mix thoroughly for 3–4 minutes until a uniform color is achieved. Pot life at 72°F (22°C) is approximately 45 minutes.