Cad Decor Paradyz 90%

Miter saw (or hand saw with miter box), measuring tape, level, painter’s tape, latex caulk, and heavy-duty construction adhesive (e.g., Liquid Nails).

Hold the Cad Decor Paradyz molding against the wall. Use a pencil to mark the top and bottom edges. For corners, cut inside or outside miters at 45 degrees depending on the corner angle. cad decor paradyz

Run a zig-zag bead of construction adhesive on the back of the molding. For larger pieces (like ceiling medallions), apply adhesive around the perimeter and a spiral in the center. Miter saw (or hand saw with miter box),

Ensure your wall or ceiling is clean, dry, and free of dust. If the surface is glossy, sand it lightly to help the adhesive bond. For corners, cut inside or outside miters at

Once dry, apply a bead of flexible latex caulk along the edges where the molding meets the wall. Wet your finger and smooth the caulk to hide the seam completely. Let it dry for 24 hours.